Welcome to the official website of Guangzhou Zero Point One Technology Co.

  • 中文 (中国)
  • English

35 twin screw extruder length-to-diameter ratio 40:1

Sales:
42
Product Details

Product Introduction:

The screw diameter of the 35 twin-screw extruder is 35mm, and the length-to-diameter ratio is 40:1. This extruder adopts a building block screw design, which has high flexibility and adjustability. The 35 twin-screw extruder is a plastic processing equipment developed on the basis of the single-screw extruder. It has excellent feeding performance, mixing and plasticizing performance, exhaust performance and extrusion stability, so it is widely used in the molding process of extruded products. This equipment plays an important role in the plastic processing industry, especially in the fields of glass fiber reinforcement, flame retardant fuel granulation, etc. The main components of the twin-screw extruder include auxiliary equipment such as pay-off device, straightening device, preheating device, etc. These equipment work together to ensure the high efficiency and quality of plastic processing.

Product performance:

1. The high torque and high speed design enables the extruder to handle high viscosity materials while maintaining efficient production.
2. The split twin-screw extruder design allows easy opening of the barrel for maintenance or cleaning, which greatly reduces the time required for maintenance and reduces labor intensity. There is no need to disassemble the heating and cooling system for maintenance, just loosen a few bolts and lift the upper part using a hydraulic device.
3. When changing colors or materials, the split twin-screw extruder can quickly open the barrel for manual cleaning, thereby reducing or avoiding the use of large amounts of cleaning materials and saving costs.
4. Due to easy cleaning and maintenance, production efficiency is significantly improved, and the operation time when changing colors or materials is shortened, thereby increasing production time.
5. Other advantages of the twin-screw extruder enable it to achieve high-yield, high-quality and high-efficiency production.
6. The twin-screw extruder is suitable for the processing of powder raw materials. Compared with the single-screw extruder, it has better mixing, exhaust, reaction and self-cleaning performance.
7. The twin-screw extruder can be applied to the processing of various types of materials, including plastics and blends with poor thermal stability.
8. Since the barrel is easy to open, the operator can check the wear of the threaded components and the barrel liner at any time, and perform maintenance or replacement in time to avoid quality problems caused by wear.
9. By changing the screw configuration and operating conditions, the twin-screw extruder can achieve complex mixing morphology and structural changes, which is essential for producing high-quality products.
10. The intelligent control system can realize remote operation and monitoring, improving the convenience and safety of operation.